Version 0.7.13
- Modified the pulse guiding command to better detect if the telescope is slewing
- Added support for telescope hitting the mount (for older telescopes only)
- Added post connect test to check that the serial port is operating correctly.
- Added backlash compensation to the focuser
- Added reverse direction support for the focuser
- Added ability to unpark telescope (LX200-GPS only)
- Refactored the backlash compensation so that less move commands are issued.
- Adding support for enabling the Rts and Dtr signals on the serial port, this allows the driver to connect to Meade LS 8 telescopes. (Don’t turn it on for others as it’s the #505 cable does not use those connections)
- Added support for setting the site elevation, it’s saved to the profile rather than the scope.
- Low precision enhancements that will benefit LX200 Classic owners
